Verified by manufacturer 4 months ago
HiSec SingleFix
Range of security fencing.
The Secured by Design approved HiSec range of perimeter security fencing use the popular ‘358’ welded mesh configuration to repel thieves, trespassers and intruders. Their attributes make this system a suitable solution for high security applications reflected by its use prison facilities in the UK. The close-mesh configuration ensures that the HiSec DualFix system is difficult to climb, highly secure and visually appealing.
Using the DualFix and SingleFix clamp bar system, risk of potential attack can be mitigated. For high security sites, the panel is flat against the post and the panel ends are held against the post by a front plate which makes levering the panels off very difficult. The HiSec DualFix system is available up to 5.2 m high in a single panel.
Using the Spider clip fixing system is a more cost effected way to fix high security panels than a full length clamp bar yet still works to mitigate the risk of potential attack. For high security sites, the panels are overlapped and the panel ends are held against the post by a front plate which makes levering the panels off very difficult. The HiSec Spider system is available up to 3 m high in a single panel.
Pedestrian and vehicle access solutions have been designed to address both aesthetical requirements along with ensuring the same security level of the mesh is maintained. The system is also ideal for integrating with CCTV, PIDs and security topping enhancements such as barb and razor coils, all of which can be supplied as part of a complete turnkey solution.
Features and benefits:
Finish | Galvanized Powder-coated |
Material | Steel |
Width | 2515 mm |
Height | 1270 mm 1829 mm 2007 mm 2438 mm 2997 mm |
Uniclass | |
CAWS | Q40/125 Open mesh steel panel general purpose fencing Q40/27 Open mesh steel panel general purpose fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing |
Standard | To BS1722, ISO 12944. |
Posts | 60 x 60 mm rectangular hollow section (RHS) posts.Guidance for specification option: Sizes dependent on height, spaced at 2440 mm centres. 80 x 40 mm rectangular hollow section (RHS) posts.100 x 50 mm rectangular hollow section (RHS) posts.120 x 60 mm rectangular hollow section (RHS) posts. |
Panels | HiSec mesh.Guidance for specification option: Comprising of 12.7 x 76.2 mm mesh with single 4 mm vertical wires at 76.2 mm centres and 4 mm horizontal wires at 12.7 mm centres. |
System accessories | Not required.Pedestrian gates.Guidance for specification option: Single leaf, 1.2 m wide, or width to suit, consult manufacturer and insert requirements. Vehicular gates.Guidance for specification option: Double leaf, 3.0 m wide, or width to suit, consult manufacturer and insert requirements. |
Height | 1270 mm. 1829 mm. 2007 mm. 2438 mm. 2997 mm. Manufacturer guidanceAdditional heights up to 7.2 metres available upon request. |
Applied finishes | Galvanized and polyester powder coated. |
Fixing | Bolt down. In ground. Wall. |
Gates | 50 x 50 mm RHS frame, Zaun HiSec mesh bolted onto the frame using the Zaun picture frame design, slide latch, rubber bump stop and two gate posts. Guidance for specification option: Vehicular access also supplied with drop bolts. |
Panel fixings | Panels fixed to posts with full height 80 x 5 mm clamp bar with twin bolt fixings at 400 mm centres. Guidance for specification option: The full height clamp bars create a safe finish with the mesh ends behind the clamp bar. |
Fixings | Through Bolts. Nuts & washers. |
Width | 2515 mm. |
Mesh size | 76.2 x 12.7 mm. |
WireDiameter | 4 mm / 4 mm. Guidance for specification option: Vertical x Horizontal. |
Weight | 8 kg per sqm. Guidance for specification option: Panel weight. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |