Compare

Intercrete® 4852

Name: Intercrete® 4852
Brand: International®, brand of AkzoNobel
SKU: 7v3RfPKrBxiYifSJjAUf2t

Verified by manufacturer 5 months ago

A two component, fast drying, water based epoxy and polymer modified cementitious flooring.

Jump to:

Application

Specifically designed for the structural waterproofing and protection of concrete floors where improved chemical and abrasion resistance is required.
Suitable for use where rapid return to service is required and/ or green concrete is the likely substrate.
Depending upon the condition of the substrate and any exposed steel reinforcement, additional surface preparation products from the Intercrete range may be required prior to the application of Intercrete 4852. Consult International Protective Coatings for further details.
All concrete floors should be appropriately sealed using Intercrete 4850 prior to the application of Intercrete 4852.
The following topcoat is recommended for Intercrete 4852: Intercrete 4870.

A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the levelling and protection of concrete substrates.

Features and benefits:

Low permeability to water at 10 bar positive and negative pressure.
High resistance to carbon dioxide gas and chloride ion diffusion.
Good flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish.
Fast drying.

Color	Grey
Finish	Matt
Material	Cement Guidance for specification option: Water based epoxy and polymer modified cementitious flooring.
Length	Bespoke
Width	Bespoke
Height	Bespoke

Uniclass	Pr_35_31_06_64 Polymer-modified levelling screed mixesPrimary
CAWS	C42/320 Levelling/ smoothing coats C42/345 Protective coatings for concrete

Fine aggregate	Required. Guidance for specification option: Enhance adhesion of subsequent high build decorative/tiled finishes by broadcasting a suitable fine aggregate into the freshly laid material. Not required.

Dry film thickness	3000–6000 μm. Guidance for specification option: Microns dry.
Density	1950 kg/m³.
CompressiveStrength	42.5 MPa. Guidance for specification option: To BS EN 4551 at 20°C - after 28 days. 4 hours: 5.0 MPa. 1 day: 15.0 MPa. 7 days: 25.0 MPa.
Weight	30 kg.