Intercrete® 4870
Verified by manufacturer 5 months ago
A single component, water based acrylic curing membrane designed for use with Intercrete repair and protection systems.
Application
Specifically designed to be spray-applied to the surface of freshly installed repair mortars, fairing coatings and cementitious coatings to retain moisture and assist cure. Intercrete 4870 should always be applied directly over freshly installed Intercrete repair and protection systems. It is recommended that application should be done as soon as practically possible after the final layer of the repair and protection system is in place. Typically, this can be done after as little as 15 minutes.
Intercrete 4870 is normally applied as the final layer of an Intercrete repair and protection system.
Description
Features and benefits:
- A practical alternative to conventional methods such as polythene sheeting or damp hessian.
- May also be used as a sealer coat for concrete.
- Colourless, matt finish.
Where there is a requirement for resistance to highly aggressive chemicals contact International Protective Coatings for specific recommendations.
General information
Color | Clear |
Finish | Matt |
Material | Acrylic |
Uniclass | |
CAWS | C42/310 Repair mortar C42/320 Levelling/ smoothing coats C42/340 Crack/ void sealing grouts C42/345 Protective coatings for concrete |
Specification data - Concrete curing coatings
Composition | Water-borne. |
Colouring agent | None. |
Execution | Applying curing coatings to concrete. |
Product Reference | Intercrete® 4870 |
Dry film thickness | 65 μm. Guidance for specification option: Microns dry. |
Wet film thickness (minimum) | 186 μm. Guidance for specification option: Microns wet. |
Weight | 5 kg. |