ITHERME ALUPLATE 50 - Underfloor Heating System

The ITHERME ALUPLATE 50 system is a low-profile underfloor heating solution designed for joisted or battened floor constructions. It incorporates pre-routed high-density EPS insulation and aluminium heat diffusion plates to support efficient and consistent heat transfer across the floor area. The system is engineered to sit flush with the top of the joists, allowing a smooth installation of structural plywood or gypsum fibre boards before the final floor finish is applied, making it suitable for a wide range of interior applications.

Features and benefits:

• Provides even and consistent heat distribution using aluminium heat diffusion spreader plates.
• Designed specifically for joisted and battened floor constructions.
• Utilises 50 mm EPS insulation with a compressive strength of the 150 kPa insulation is what is shown within the initial image, but multiple options are available at the bottom of the datasheet.
• Compatible with Itherme VE-FLEX 16 x 2 mm PE-RT/EVOH/PE-RT multilayer pipe to DIN 4726 standards.
• Finishes flush with the top of the joist to allow standard floor build-ups.
• Suitable for intermediate floors above heated spaces.
• Offers design flexibility with 150 mm and 200 mm pipe centre options to suit different layouts.
• Adds no additional height to the floor where sufficient build-up is available.
• Accepts all common floor finishes when used with plywood or structural gypsum fibre panels.