LINETRAXX® PEM353 Power Quality Measuring - Universal Measuring Device
Verified by manufacturer 5 days ago
PEM353
PEM353
CE Marking
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
A digital universal measuring device for electricity supply networks.
Application
- Modern indicating instrument for electrical quantities, e.g. as a replacement for analogue indicating instruments.
- Power quality monitoring.
- Limit value monitoring (setpoints) with alarm forwarding.
- Measurement and monitoring of the N conductor.
- Energy and power measurement, e.g. as part of energy data monitoring.
Description
The digital universal measuring device PEM353 is used to record and display measured quantities of an electricity supply network, and make them available via the communication interface.
The range of measurements extends from voltages and currents to power and energy meters to measured quantities of the voltage quality, such as THD and the individual harmonics up to the 31st order.
The PEM353 is suitable for use in 2-, 3- and 4-wire systems and in their respective versions as TN, TT and IT systems. This allows monitoring single and polyphase systems. With its standardised dimensions of 96 x 96 mm, the device is intended for front panel mounting.
Features and benefits:
- Numerous measured quantities (see manufacturer's literature for features/functions).
- Power quality monitoring.
- Limit value monitoring (setpoints) with alarm forwarding.
- Energy and power measurement with storage and time of use.
- Configurable start page with four measured quantities.
- N conductor measurement and monitoring (PEM353-N only).
General information
Color | Yellow |
Shape | Square |
Length | 96 mm |
Width | 80 mm |
Height | 96 mm |
Warranty description | Two year |
Uniclass | |
CAWS | V90/430 Electrical accessories |
Specification data - Digital metering equipment
Standards | To DIN EN 62053-22, DIN EN 61557-12 and DIN IEC 61554. |
Display | LCD graphic display. |
Rated voltage | TN and TT system (earthed): a.c. 230/400–400/690 V, CAT III 600 V IT system (unearthed): a.c. 400–480 V, CAT III 300 V/ a.c. 500–690 V, CAT II 1000 V. |
Phase arrangement | Single phase, two-wire.Three phase, three-wire.Three phase, four-wire. |
Current measuring range | Via external CTs 1 A or 5 A. |
Rated frequency | 45–65 Hz. |
Metering functions | Phase (V). |
Mounting | Front panel. |
Ingress protection (minimum) | IP20 (installation); IP54 (front, with rubber seal). |
Outputs | 2 x relay. |
Communications | RS-485 (Modbus RTU, BACnet MS/TP, DNP). |
Connections | Screw-type terminals, plug-in connector. |
Input current | Current inputs (I1, I2, I3): 5 A/ 1 A. |
Sustainability data
Country of product manufacture | Germany |
Recyclability | Can be returned to manufacturer for recycling under WEEE regulations |
Third party certifications
CE Marking
EU - Declaration of Conformity PEM35x
UK Conformity Assessed (UKCA)
UKCA PEM35x
Literature
PEM353 Data Sheet
Power Quality Flyer
PEM353 Quickstart Guide
Product overview Power quality and energy measurement
PEM353 Manual