MB 2K Flexible Tanking Slurry - Multi-functional Waterproof Coating
Verified by manufacturer 30 days ago
BBA Agrément Certificate
Certificate type
Multi-functional waterproof coating.
Application
Flexible tanking slurry suitable for a range of uses, including:
- Rapid waterproofing.
- Waterproofing in new buildings.
- Horizontal waterproofing in and underneath walls.
- WTA-compliant retroactive waterproofing.
- Can be applied >3 m below ground.
- Approved for connecting to water impermeable concrete structures.
- Waterproofing of foundations and base points.
- Waterproofing in a bond.
- Bonding layer on old bitumen coatings.
- Repair of flat roof waterproofing on roofs of structures which are not habitations.
- For attaching perimeter insulation panels.
Description
Multi-functional waterproof coating, for application as a grout or slurry.
Features and benefits:
- Tested on crack formation of greater than 3 mm (according to DIN EN 14891).
- Complete drying and cross-linking occur rapidly, after just 18 hours.
- Meets the test requirements for PMBC.
- Radon-tight (verified through testing).
- Solvent-free.
- Bitumen-free.
- Water pressure tight.
- High tensile adhesion strength.
- Good adhesion on non-mineral substrates (e.g. plastics, metals).
- Three times as dimensionally stable as required.
- Highly flexible, elastic and crack-bridging.
- Can be covered after a very short time (≥ 4 hours).
- UV-resistant.
- Freeze/ thaw-resistant.
- Can be plastered and painted over.
- Can be applied as a grout, with a brush or trowel, or by spraying.
- CE marked to EN 14891: 2012.
Consult manufacturer's literature for substrate preparation guidelines.
General information
Color | Grey |
Finish | Smooth |
Material | Polymer Cement |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M40/110 Tiling to J10/110 Proprietary mortar E60/325 Grouting C41/390 Grouting joints |
Specification data - Polymer-modified cementitious slurries
Third-party product certification | Declaration of Performance (DoP). |
Composition | Polymer binder, cement, additives, special fillers. |
Application rate | 1.1 kg/m²/mm. |
Crack bridging | To DIN EN 14891, ≥3 mm (with a dry layer ≥3 mm thick). |
Water vapour diffusion resistance | μ = 1755. |
WaterImpermeability | Tested up to an 8 m water column. |
Reaction to fire | To DIN EN 13501-1, Class E. |
Drying time | At 5 °C, 90% RH: Approximately 18 hours for a 2 mm layer. |
Compacted bulk density | 1.0 kg/dm³. |
Tensile strength | ≥0.5 N/mm². |
Colour | Grey. |
Sustainability data
Country of product manufacture | Germany |
Material | Polymer Cement |
Third party certifications
BBA Agrément Certificate
BBA Certificate
BBA Agrément Certificate
BBA
Literature
MB 2K Technical Datasheet
MB 2K Brochure
MB 2K Technical Inspection Report
Remmers Podium Deck Waterproofing Technical Drawing