Monodraught Sun Tunnel for Pitched Roof Plain Tiles Kit -Monodraught Pitched Roof Plain Tiles Sunpipe® Kit - Rooflights, Daylight Pipes

The Monodraught Sun Tunnel Kit for Pitched Plain Tile Roofs directs sunlight into a room from roof level. The Sunpipe collects daylight using a patented Diamond dome, using a silverised PVD coated mirror-finished aluminium tube to transfer light to a room, with a ceiling diffuser evenly distributing the light around the room.

The Monodraught Sun Tunnel Kits are suited to almost any application, and have been installed anywhere from residential bedrooms to the Olympic Handball Arena in London.

Monodraught Sun Tunnel Pitched Roof Kits are a revolutionary new way to get natural daylight from rooftops into interiors to brighten dark rooms and underground spaces. These sun pipes are suited to almost any application, and have been installed anywhere from residential bedrooms to commercial properties.

30° & 45° adjustable elbows can be used with all SUNPIPE applications to direct daylight to where it is required.

Features and benefits:

• Directs sunlight into a room from roof level by collecting it in a diamond dome and transferring it through a physical vapour deposition (PVD) coated, mirror-finished, anodized aluminium tube to maximize reflections and limit light diffusion.
• A ceiling diffuser will evenly distribute light around the room.
• Suitable for brightening dark rooms and underground spaces.

Components:

• Acrylic diamond dome.
• Acrylonitrile-butadiene styrene (ABS) plain tile flashing plate (3.5 mm). Topped with polymer modified asphalt (PMA) to blend with plain tiled roofs. Supplied with code 4 lead flashing for suitable weathering.
• Crimped end pipe (610 mm, 0.5 mm-thick). Coated with MIRO SILVER® 27/427OAG. Crimped ends fit into plain ends.
• 45° adjustable elbow (0.5 mm). Coated with MIRO SILVER® 27/427OAG. Creates an offset to the pipe (i.e. to deviate course). Can be rotated to achieve different angles.
• Plain end pipe (610 mm, 0.5 mm-thick). Coated with MIRO SILVER® 27/427OAG.
• Plywood backing plate (4 mm). Helps to mark out the opening at ceiling level and provides additional structural fixing for the diffuser.
• Ceiling extension (250 mm, 0.5 mm-thick). Provides a permanent joint between the diffuser and end pipe. Coated with MIRO SILVER® 27/427OAG.
• Double-glazed MicroPrism ceiling diffuser. Offers high thermal performance whilst ensuring maximum spread of natural daylight. White finish.
• Installation pack contains silicone sealant, screws, sealed rivets, neoprene washers, brushed nylon condensation seal, aluminium tape and universal installation instructions.