Monorex GM/ GF

Through coloured, semi-light, one-coat weather resistant and breathable decorative render for internal and external vertical masonry and concrete walls. Available in more than 48 colours.

Features and benefits:

• Through coloured one-coat finish.
• Suitable for hand or machine application.
• Wide range of finishes available in two different grain sizes.
• Pack size: 30 kg bag.

Suitable for:

• Masonry conforming to BS 5628-3 composed of concrete blocks, clay bricks or lightweight clinker blocks.
• Shuttered concrete walls.
• Low density cellular lightweight AAC concrete block.
• Base coats conforming to BS 5262 and BS EN 13914-1.
• Dry-stacked interlocking modular wall units, e.g. Durisol.
• Grey weather resistant base coats e.g. Tradirex, Parmurex, Monogris E.
• Existing substrates - subject to surface preparations.

Unsuitable for:

• Weak mortar or plaster (gypsum) coated constructions.
• Exposed horizontal substrates with a vertical incline above 10°. A backward incline may affect water run-off and may have a tendency to hold moisture.

Finishes:

• Fine scraped – Monorex GF.
• Medium scraped – Monorex GM.
• Spray textured – Monorex GM/ GF.
• Smooth spray textured – Monorex GM/ GF.
• Sponge float finish – Monorex GF.
• Trowel float finish – Monorex GF.

For additional information on the range of finishes consult the Parex literature referenced Textured Finishes.

Approvals:

• BS 5628-3 Code of practice for the use of masonry.
• BS EN 13914-1 Code of practice for external rendering.
• BS 8000 Workmanship on building sites.
• BS EN ISO 14001 (2004).
• CE Approval EN 998-1 One coat render system (Monocouche).