Newton Plug Fixings for Securing Newton Waterproofing Membranes - Plug Fixings
Verified by manufacturer 4 months ago
CDM Multiplug (A1, A24, A32)
CDM Multiplug (A1, A24, A32)
A range of plug fixings for Newton waterproofing membranes.
Application
- CDM MultiPlug (A1) – For securing Newton System 500 membranes to the wall and for providing a fixing point for 5mm screws and the CDM Helical MultiPlug Tie
- CDM NuSeal Plugs (A2, A3) – For fixing the membrane to vaulted ceilings and sloping soffits
- CDM Helical MultiPlug Ties (WT 155 to 325) – For fixing into the head of the CDM MultiPlugs for the tying in of block or brick internal walls that are built in front of the Newton CDM System
- Insulation Fixing Plugs (IF90) – For fixing CDM Fibran XPS-500C insulation spacer to the slab/raft where lightweight floor finishes are to be used
Description
A range of membrane plug fixings.
General information
Color | Blue Orange Red White |
Finish | Smooth |
Material | Plastic |
Shape | Other |
Width | 10 mm 11 mm 4 mm |
Height | 57 mm 11 mm 50 mm |
Uniclass | |
CAWS | J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane J40/47 High-density polyethylene/ polypropylene studded cavity drain membrane |
Specification data - Studded cavity drainage membrane plugs
Retaining head diameter | Please refer to datasheet for this information. |
Plug | Multi Plug. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Recyclability | 0 |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Literature
Damp Proofing Ancillaries TDS
Case studies
Waterproofing Historic Leaking Vaults
Listed Vault Waterproofing in Central London