NBS Source
I'm a manufacturer
Compare variants

Powerfloat Primer & Rapid - Adhesive primer for smooth surfaces

Verified by manufacturer 5 months ago

Powerfloat Primer Rapid

Watco UK Ltd Variant:

An epoxy resin primer for smooth surfaces.

Jump to:
+44 (0)1483 418418 Website

Application

Surface preparation

New concrete should be allowed at least 28 days to dry. Surfaces should be clean, dry and free from oil, grease, dust, dirt and other contaminants. Existing coatings should be well bonded and sound.


Mixing

The tall outer tin contains a tin of Resin and a tin of Activator. Remove these two tins and stir the contents of each thoroughly. Decant both tins into the tall outer tin. The two components should then be very thoroughly mixed together using a wide bladed stirrer. A wooden batten at least 25mm wide is ideal. Mix for 2–3 minutes until an even colour and consistency are obtained.


Application

If appearance is critical we recommend the Application of a small trial area first.

Decant the mixed components into a roller tray and apply using a medium pile type roller. A brush may be used for cutting in. Aim to apply the mixed components within one hour (they are usable for up to 2 hours maximum at 20°C). Do not apply at temperatures below 10°C or above 30°C. Cold or damp conditions may retard or prevent full curing. Avoid applying too thickly.

Description

A virtually solvent free, two part, water based, epoxy resin primer designed for application to smooth, non-porous surfaces which are prone to rejecting paint. One coat of Watco Powerfloat Primer eliminates the need for mechanical preparation, and so retains the attractive smooth power floated finish.


  • Powerfloat Primer (available in a clear or light grey finish) – Powerfloat Primer can be over coated with most Watco coatings within 12 hours (based on a temperature of 20°C).
  • Powerfloat Primer Rapid (Available in a light grey finish) - is a fast drying formulation which allows the floor to be over coated with a water based coating within 4–6 hours (based on a temperature of 20°C), which enables the area to be put back into use as quickly as possible.


Features and benefits:

  • Primes hard, smooth surfaces ready for painting.
  • Eliminates the need for costly shot blasting or grinding.
  • One coat application – quick and easy to apply.
  • Grey or clear option available.
  • Ready for overcoating in 12 hours, or 4–6 for the rapid version.
  • Low odour.
  • Superior performance demonstrated by ISO testing to CE Mark EN 1504-2.

General information

Specification data - Primer-sealers

Composition

Water-based.

Execution

Applying primer.

Product Reference

Powerfloat Primer Rapid

Colour

Grey.

Clear.

Dry film thickness

120 microns.

Wet film thickness (minimum)

160 microns.

Coverage

30 m² per 5 L.

Abrasion resistance

84 mg.

Guidance for specification option:

To ISO 5470-1.

Adhesion

2.0 MPa/Nmm².

Guidance for specification option:

To EN 1542.

(Class 0 to ISO 2409).

Impact resistance

Class 3.

Guidance for specification option:

To ISO 6272.

Flexibility

2 mm.

Guidance for specification option:

To ISO 1519.

Volatile organic compound (VOC) level

30 g/L.

Capacity

5 L.

Literature

Data Sheet: Powerfloat Primer & Rapid

Data Sheet: Powerfloat Primer & Rapid