Retractapost - Galvanised Round

The RetractaPost is a simple, cost effective, yet highly effective way to prevent unwanted vehicle access.

Features and benefits:

• The RetractaPost is raised and lowered vertically. When lowered the post is fully below ground and covered using the integral lid.
• The post is padlockable (padlock not supplied) in the raised position by first rotating the post 45° and then attaching the padlock between the post to the lid.
• The RetractaPost 500 is 500 mm above ground in the raised position.
• The RetractaPost 745 is 745 mm above ground in the raised position.
• The RetractaPost 745 FB is 745 mm above ground in the raised position.

Installation:

• It is recommended that posts are placed no further than 1200 mm apart to ensure no vehicle may pass between the raised posts.
• An excavated hole of approximately 900 mm deep (1200 mm deep for RetractaPost 745 and 745 FB) and 300 mm diameter is required for installation.
• Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400 mm must be concrete.
• The lid of the post should be no more than 10 mm above finished ground level.