SEC600 Industrial Sectional Door

Vertical, hi lift, standard lift and low headroom track systems are available for face fixing.

Water Ingress up to Class 3 at 150 Pa.

BS EN 12424:2000, Classification 3.

Weighted Level Difference Dw value 25 dB.

Insulated panel material U Value 0.8 w/m²K.

Steel insulated panels 610 x 40 mm. 40 mm insulated CFC-free rigid polyurethane foam, density 40 kg/m³. Panels have a U value of 0.8 W/m ²k and are completed with pre drilled galvanised steel end caps. EPDM 2 mm thick weather proof seals to top and side reveals.

Guidance for specification option:

Panels can be solid, include vision panels or be fully glazed.(Maximum of one vision panel per linear metre width up to a maximum of five per panel).

All components fully galvanized with galvanized fixings. Vertical Tracks, Horizontal tracks with curve. Vertical angle, Horizontal angle, EPDM 2 mm thick Side Seals. Track slice plates.

BS EN 12453 Fortress SEC600 Drive System™ 415 Volt 3-phase operator with push button controls, supplied with hand chain operation for use in the event of emergency open/closure.

BS EN 12453 Hold-to-run and dead-man close automation for applications Controls where there are untrained door users. Drive unit incorporates a manual release for emergency use of hand chain.

Push up/pull down.

Hand chain.

Guidance for specification option:

(maximum recommended dimensions 3000 wide x 3000 mm high).

Doors supplied with adjustable side hinges complete with carriers, intermediate hinges, nylon and steel rollers, cable sets, bottom corner brackets, spring bumpers, self tapping panel fixings. Doors up to 5000mm wide will be supplied with single hardware and single width end caps. Doors 5001mm wide and above will be supplied with double hardware and double end caps. Doors 6001mm wide and above will be supplied with wind bracing bars. All doors are fitted with cable and spring brake safety device as standard.

Auto time return control panel.

Keyed shoot bolts.

Micro switch.

Photocell.

Guidance for specification option:

Light beam sensor will detect the presence of a person or object that interrupts the light beam providing a non-contact safety system.

Radar sensor.

Remote control receiver and transmitters.

Self-checking safety edge.

Guidance for specification option:

Will stop and reverse the door movement immediately upon contact with an obstacle.

Spring load locking shoot bolts.

Wicket gate.

Guidance for specification option:

Standard size 800 x 2000 mm, complete with lock, handles and safety locking system.

Induction loop card.