Sika AnchorFix®-2+ - Styrene-Free Anchoring Adhesive
Verified by manufacturer 4 days ago
Styrene-free anchoring adhesive for medium to high loads.
Application
As a fast curing anchoring adhesive for all grades of:
- Rebars/ reinforcing steel
- Threaded rods
- Bolts and special fastening systems
- Concrete (cracked and non-cracked)
- Solid masonry
- Steel
- Hard natural stone
- Solid rock
Description
Solvent and styrene-free, epoxy acrylate based, two-component anchoring adhesive for normal/ moderate climate conditions.
Features and benefits:
- Fast curing.
- Standard guns can be used for application.
- High load capacity.
- ETA to ETAG 001 for anchoring in concrete.
- ETA to ETAG 001 for rebar connections.
- Suitable for cracked concrete.
- Drinking Water certified.
- LEED Attestation available.
- Non-sag, even overhead.
- Styrene-free.
- Low odour.
- Low wastage.
- Suitable in wet/ damp (but clean) holes.
- Appropriate for marine environments.
Approvals/ standards:
- Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR-090-032534, and provided with the CE marking.
- Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-036698, and provided with the CE marking.
- Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543.
General information
Color | Grey Manufacturer guidanceWhen mixed - components are white and black. |
Material | Acrylic Epoxy |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | F30/290 Proprietary special fixings |
Specification data - Chemical anchor cartridges
Classification data | |
Certification | Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 1, ETA-14/0346, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR-090-032534, and provided with the CE marking. Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-13/0779, Declaration of Performance 020205010020000011 5034408 (1138), certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-036698, and provided with the CE marking. Drinking Water Certificate: Water Regulations Advisory Scheme Ltd. (WRAS) Approval Number: 1604543. |
Resin | Styrene-free epoxy acrylate. |
Accessories | |
Dispenser | Manual. Guidance for specification option: Standard guns can be used for application. |
Mixing nozzle | Required. |
Appearance | Grey (when mixed). |
Density | ~1.60–1.68 kg/L (when mixed). |
Compressive strength | To ASTM D 695, ~70 N/mm² (seven days, +20°C). |
Modulus of elasticity | To ASTM D 695, in compression: ~7000 N/mm² (seven days, +20°C). To ASTM D 638, tensile: ~3800 N/mm² (seven days, +20°C). |
Flexural strength | To ASTM D 790, ~29 N/mm² (seven days, +20°C). |
Tensile strength | To ASTM D 638, tensile: ~15 N/mm² (seven days, +20°C). |
Service temperature | Long term: -40°C minimum/ +50°C maximum. Short term (1–2 hours): +80°C. Guidance for specification option: ETAG 001, part 5. |
Sustainability data
Material | Acrylic Epoxy |
Literature
Sika AnchorFix®-2+ Product Data Sheet