Sika MonoTop®-1010 - Bonding Primer and Corrosion Protection
Verified by manufacturer 6 days ago
Bonding primer and reinforcement corrosion protection cement based slurry containing recycled waste materials.
Application
- Bonding primer as part of a concrete repair system.
- Reinforcement corrosion protection as part of a concrete repair system.
- Suitable for control of anodic areas (Principle 11, method 11.1 of EN 1504-9).
- Interior and exterior use.
Description
Sika MonoTop®-1010 is a one-part, cementitious, polymer-modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar.
Features and benefits:
- Uses recycled waste materials.
- Easy to use, just add water.
- Good adhesion to concrete and steel.
- Good resistance to water and chloride penetration.
- Can be applied with a brush or by wet spray technique.
- Part of the range of Sika mortars.
- CE Marking and Declaration of Performance to EN 1504-7 - Product for reinforcement corrosion protection.
- WRAS-approved material.
Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations.
General information
Color | Grey |
Material | Cementitious Polymer-modified cement |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | C42/315 Protective coating to reinforcement C42/305 Proprietary repair systems |
Product range |
Specification data - Polymer-modified cementitious slurries
Classification data | |
Composition | Portland cement, cement replacement, re-dispersible polymer powder, selected aggregates and additives. |
Colour | Grey. |
Compressive strength | To EN 12190, ~50 MPa after 28 days. |
Adhesion strength | To EN 1542, tensile, ~2.0 MPa after 28 days. |
ShearStrength | To EN 15184, lap: Pass. |
Water vapour diffusion resistance | ~100 μH₂O. |
Corrosion resistance | To EN 15183, Pass. |
Layer thickness | Bonding primer: sufficient to coat the concrete surface in a thin layer filling pores and voids. Reinforcement: corrosion protection. Guidance for specification option: Insert requirements, 2 mm minimum thickness. |
Approvals | WARS-approved material. CE Marking and Declaration of Performance to EN 1504-7 - Product for reinforcement corrosion protection. |
Sustainability data
Material | Cementitious Polymer-modified cement |
Literature
Sika MonoTop®-1010 - Product Data Sheet