NBS Source
I'm a manufacturer
Compare variants

Solar Green Roof

Verified by manufacturer 18 days ago

Solar Green Roof SOLon

Optigreen Ltd Variant:

Solar mounting supported by the green roof to increase biodiversity.

Jump to:
+44 (0)203 5899404 Website

Application

-For extensive green roofs.

-Also suitable for inverted roofs.

-No roof penetration is required for installation.

Description

The combination of photovoltaics and green roofs on the Optigrün Solar Green Roof combines many advantages. The evaporative cooling of the vegetation leads to an increase in the efficiency of the photovoltaic system. At the same time, the green roof makes an important contribution to maintaining the natural water balance and increasing biodiversity.


Optigrün's load-bearing solar mounts are fixed in position and secured against wind suction by the green roof structure. No roof penetration is required for installation. The solar mounts can be combined with various system structures and enable multifunctional roof use.


Features and benefits:

  • Sustainable power generation with solar energy.
  • Flood protection and relief of the sewerage system - preservation of the natural water balance.
  • Green areas provide habitats instead of dead sealed surfaces.
  • Improving quality of life and active health protection.

Solar Green Roof FKD:

  • Load-supported solar mounting support.
  • Roof penetration-free fastening of PV modules thanks to combination with the green roof.
  • East-west orientation possible.
  • Integration of the solar mounting support into the Drainage and Storage Board.
  • Yield increase for the photovoltaics system.
  • High mounting support to prevent shading of the PV modules by vegetation.
  • Plant growth also underneath the modules.
  • Low weight of the system structure.
  • Also suitable for inverted roofs.

Solar Green Roof WRB:

  • Load-supported solar mounting support.
  • Integration of the solar mounting support into the Water Retention Box (WRB).
  • High water retention and water discharge delay.
  • Roof penetration-free fastening of PV modules thanks to combination with the green roof.
  • East-west orientation possible.
  • Yield increase for the photovoltaics system.
  • High mounting support to prevent shading of the PV modules by vegetation.
  • Plant growth also underneath the modules.
  • Low weight of the system structure.
  • Also suitable for inverted roofs.

Solar Green Roof SOLon:

  • High electricity yield, comparable with a conventional solar green roof.
  • High-quality double-glazed modules with high bifacial coefficient and hail protection.
  • Retrofitting on existing green roofs possibl.
  • Very low weight of 12-22 kg/m².
  • Cohesive system, secured against shifting as a result of wind pressure, no occurrence of wind suction.
  • Consistent supply of light and water to the vegetation. The green roof can develop unhindered.
  • Maintenance can easily be carried out on the green roof.
  • Integrated cable management.
  • Very simple, quick installation.
  • Certified in accordance with IEC 61215, IEC 61730, IEC 61701, IEC TS 62804 (module safety and reliability).

General information

Color

Green

Brown

Black

Other

Finish

Natural

Material

Vegetation

Plastic

Fleece

Shape

Square

Rectangle

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Ss_45_40_47_28 Extensive green roof systemsPrimary

CAWS

V90/312 Photovoltaic systems

Q37/130 Extensive green roof

Specification data - Extensive green roof systems

Protection

-

Protection layer

Protection and storage fleece RMS 300.

Guidance for specification option:

  • Strength class: GRK 2.
  • Thickness: approx. 3.6 mm.
  • Weight: 300 g/m².
  • Water storage: approx. 2 l/m².
  • Roll: 100 m².
  • Roll width: 2.0 m.
  • Sound reduction: ∆LW: 35 dB.

Other.

Guidance for specification option:

Consult manufacturer for details and insert requirements.

Moisture control

-

Drainage layer

Drainage and storage board FKD 25.

Guidance for specification option:

  • Nominal thickness: 25mm.
  • Weight: approx. 1.35 kg/m².
  • Water storage: 3.6 or 5 l/m² (depending on the side).
  • Maximum flow capacity: approx. 1.41 l/m×s (with 2% slope).
  • Compression strength filled: approx. 200 kN/m².

Other.

Guidance for specification option:

Consult manufacturer for details and insert requirements.

Filter membrane

Filter fleece FIL 150.

Guidance for specification option:

  • Strength class: GRK 2.
  • Thickness: approx. 1.1 mm.
  • Weight: 105 g/m².
  • Roll: 200 m².
  • Roll width: 2.0 m.

Other.

Guidance for specification option:

Consult manufacturer for details and insert requirements.

Planting systems

-

Planting medium

Extensive substrate.

Planting requirements

Sedum cuttings.

Fire breaks

-

Manufacturer guidance

Consult manufacturer for details and insert requirements or omit.

Edge restraints

-

Manufacturer guidance

Consult manufacturer and insert requirements.

  • Erosion protection plates ESP in pebble boarders.
  • Vegetation mats on green spaces.

Photovoltaic panel

Vertically mounted photovoltaic module.

Guidance for specification option:

  • Module technology: Bifacial/ TOPCon/ Double Glass.
  • Module dimensions: 2011 x 415 x 7.5 mm.
  • Module weight: 14 kg.
  • Nominal power: 160 Wp.
  • Area output: 100 Wp/m².

Mounting

Aluminium mounting frame and recycled plastic ballast feet.

Guidance for specification option:

  • Dimensions ballast foot: 400 x 400 x 100 mm.
  • Weight ballast foot: 12 kg.

Weight

12–22 kg/m².

Manufacturer guidance

System weight (in addition to the green roof structure).

Depth

62 cm from top edge of substrate.

Roof pitch

-

Manufacturer guidance

Consult manufacturer for details and insert requirements.

Discharge

-

Manufacturer guidance

Consult manufacturer for details and insert requirements.

System accessories

-

Manufacturer guidance

System add-ons available.

Consult manufacturer for details and insert requirements.

Sustainability data

Country of material origin

Europe

Country of product manufacture

Europe

Material

Vegetation

Plastic

Fleece

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

-

Manufacturer guidance

RMS 300

Specific properties

- 100% recycled plastic fibre (PP/PES/acrylic)


FKD 25MA

- 100% recycled HDPE

Literature

Optigrün SolarSOLon - Brochure

Optigrün SolarSOLon - Brochure

Optigrün Technical Brochure

Optigrün Technical Brochure

Optigrün Green Roofs and Photovoltaics

Optigrün Green Roofs and Photovoltaics

Similar products from Optigreen Ltd

Extensive Green Roof

Pitched Roof - Extensive Green Roof System

Retention Roof - Extensive