Suppress IT: Moisture Vapour Suppressant
Verified by manufacturer 22 days ago
Single Component, two-coat moisture vapour suppressant.
Application
- Specifically designed for use over a variety of substrates including concrete floors, sand/cement screeds and most absorbent construction materials.
- It is not suitable for use with very dense substrates.
- When the product is to be used with underfloor heating (please contact UltraFloor Technical Services for further information).
- NOTE: UltraFloor Suppress IT should not be used in projects where hydrostatic pressure is a concern.
- In such cases the use of pressure relief drainage and/or external tanking systems must be the primary method of protection against moisture.
Description
UltraFloor Suppress IT is a single component, two-coat rapid drying moisture suppressant primer membrane. It has a water based, solvent free formulation and is designed to suppress residual construction moisture – up to 95% relative humidity in cementitious subfloors (when tested with a properly calibrated surface hygrometer in accordance with BS 8203). Thus allowing earlier installation of floor coverings. The product is pigmented orange enabling easy identification and coverage control in applied areas.
Features and benefits:
- Water based, solvent free formulation.
- Single component.
- Up to 95% RH protection.
- Removes the need to prime.
- Resealable bottle, eliminating waste.
- Pigmented orange for coverage control.
General information
Color | Orange Guidance for specification option: The product should cure to provide a glossy orange coloured film |
Finish | Gloss |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | J30/10 Cold-applied damp-proofing M10/160 Proprietary self smoothing levelling screeds M10/680 Surface sealer to wearing screeds M10/4 Cement:sand levelling screeds M10/7 Proprietary quick drying levelling screeds M10/12 Proprietary polymer modified levelling screeds M10/17 Proprietary polymer modified wearing screeds M10/19 Proprietary screeds to BS EN 13813 M10/3 Bonded cement:sand levelling screeds |
Specification data - Cement-based screed surface sealers
Material | Water based.Guidance for specification option: It has a water based, solvent free formulation and is designed to suppress residual construction moisture. |
Coating application | Two. |
Coverage | 16.5 m². Guidance for specification option: Per 5 L unit. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Literature
Supress IT Technical Datasheet