Compare

TRADELINE Single Frame Resilient Bar Partition Systems Utilising British Gypsum Board

Name: TRADELINE Single Frame Resilient Bar Partition Systems Utilising British Gypsum Board
Brand: Metsec (voestalpine Metsec)
SKU: 3fV5Ggqcjp92Hq8CQdVQLb

Verified by manufacturer 5 months ago

RB70-B-59(50)

Metsec (voestalpine Metsec)

Third party certifications:

BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type

TRADELINE Resilient Bar partitions are non load bearing that achieve high levels of sound insulation.

Jump to:

+44 (0) 121 601 6000 Website

Application

Hotels residential properties, student accommodation.

Description

TRADELINE Resilient Bar systems are lightweight, non

load-bearing, friction fit systems. They can be used within

all sectors. Due to the inclusion of TRADELINE RB565

Resilient Bars on one side of the partition creates a higher

level of separation between the C stud and plasterboard

lining thereby achieving superior levels of sound

insulation performance.

Designed to give the potential to satisfy acoustic requirements for Part E of the Building regulations. Due to the high reliance on workmanship, we only recommend when the requirement is 43 DnT, w + ctr i.e. material change of use, student accommodation, hotels etc.

Sound performance up to 61 RwdB, 90 minutes fire and Severe Duty

Structural performance:

Strength grade to BS 5234-2:1992 Annexes A-F.

Fire performance:

Fire resistance to BS 476:1987:Part 22.

Acoustic performance:

Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.

Installing framing for partitions:

Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.

General information

Length	Bespoke
Width	138 mm 148 mm 170 mm
Height	Bespoke

Uniclass	Ss_25_10_30_35 Gypsum board partition systemsPrimary
CAWS	K10/30 Metal stud K10/125 Metal stud partition system

Product range	Drylining / TRADELINE Drywall Systems Drylining / Single Frame Partitions - C Stud & Resilient Bar

Specification data - Gypsum board partition systems

Framing	Tradeline 'C' Stud with Resbar, 70 mm.
Insulation	Acoustic partition roll, 50 mm.
Linings	-
Inner layers	British Gypsum Gyproc SoundBloc, 12.5 mm.
Face layer	British Gypsum Gyproc SoundBloc, 12.5 mm.
Fasteners	Tradeline Drywall Screws.
Joint treatment	Tradeline Joint Tape. Tradeline Paper Joint Tape. Tradeline Light Weight All Purpose Joint Compound. Tradeline Metal Corner Tape. Tradeline Flexible Metal Corner Tape. Tradeline Scrim Tape. Tradeline Drywall Self-Adhesive Joint Tape.
System accessories	Tradeline Acoustic Intumescent Sealant. Tradeline PB24 Partition Brace. Tradeline FS24 Flat Bracing Strip. Tradeline ASP19B Plywood Service Support Plates.

Fire resistance	To BS 476:1987:Part 22, 60/ 60 minutes (Integrity/ Insulation).
Partition height	Guidance for specification option: Insert requirement, maximum 4000 mm (at 600 mm centres). Calculated based on a limiting deflection of L/240 at 200 Pascals.
Nominal thickness	138 mm. Manufacturer guidance Optimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details.
Calculated weighted sound reduction index (Rw)	59 (-2;-7) Rw dB (C;Ctr).
Centres	600 mm.
StrengthGrade	Severe duty.
Head/ Floor channel	Tradeline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Tradeline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Tradeline Deep Track. Guidance for specification option: Used for partition heights between 4 m and 8 m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Tradeline Extra Deep Track. Guidance for specification option: Used for partition heights between 8 m and 10.2 m. Can be used as a head track where a deflection head of up to 45 mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange.
Standards	To BS 5234-2:1992, BS 476:1987:Part 22, BS EN ISO 10140-2: 2010.