Verified by manufacturer 5 months ago
RB70-K-60(50)
BSI Kitemark
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type
TRADELINE Resilient Bar partitions are non-load bearing that achieves high levels of sound insulation.
Hotels, residential properties, student accommodation.
TRADELINE Resilient Bar systems are lightweight, non
load-bearing, friction fit systems. They can be used within
all sectors. Due to the inclusion of TRADELINE RB565
Resilient Bars on one side of the partition, creates a higher
level of separation between the C stud and plasterboard
lining thereby achieving superior levels of sound
insulation performance.
Designed to give the potential to satisfy acoustic requirements for Part E of the Building regulations. Due to the high reliance on workmanship, we only recommend when the requirement is 43 DnT, w + ctr i.e. material change of use, student accommodation, hotels etc.
Sound performance up to 61 RwdB, 90 minutes fire and Severe Duty
Structural performance:
Fire performance:
Acoustic performance:
Installing framing for partitions:
Length | Bespoke |
Width | 138 mm 148 mm |
Height | Bespoke |
Uniclass | |
CAWS | K10/30 Metal stud K10/125 Metal stud partition system |
Product range |
Framing | Tradeline 'C' Stud with Resbar, 70 mm. |
Insulation | Acoustic partition roll, 50 mm. |
Linings | |
Inner layers | Knauf Soundshield Plus, 15 mm. |
Face layer | Knauf Soundshield Plus, 15 mm. |
Fasteners | Tradeline Drywall Screws. |
Joint treatment | Tradeline Joint Tape.Tradeline Paper Joint Tape.Tradeline Light Weight All Purpose Joint Compound.Tradeline Metal Corner Tape.Tradeline Flexible Metal Corner Tape.Tradeline Scrim Tape.Tradeline Drywall Self-Adhesive Joint Tape. |
System accessories | Tradeline Acoustic Intumescent Sealant.Tradeline PB24 Partition Brace.Tradeline FS24 Flat Bracing Strip.Tradeline ASP19B Plywood Service Support Plates. |
Fire resistance | To BS 476:1987:Part 22, 120/ 120 minutes (Integrity/ Insulation). |
Partition height | Guidance for specification option: Insert requirement, maximum 4200 mm (at 600 mm centres). Calculated based on a limiting deflection of L/240 at 200 Pascals. |
Nominal thickness | 138 mm. Manufacturer guidanceOptimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details. |
Calculated weighted sound reduction index (Rw) | 61 (-2;-7) Rw dB (C;Ctr). Guidance for specification option: Based on the nominal system thickness. |
Centres | 600 mm. |
StrengthGrade | Severe duty. |
Head/ Floor channel | Tradeline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Tradeline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Tradeline Deep Track. Guidance for specification option: Used for partition heights between 4 m and 8 m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Tradeline Extra Deep Track. Guidance for specification option: Used for partition heights between 8 m and 10.2 m. Can be used as a head track where a deflection head of up to 45 mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange. |
Standards | To BS 5234-2:1992, BS 476:1987:Part 22, BS EN ISO 10140-2: 2010. |
BSI Kitemark
BIM Level 2 Kitemark - For Design and Construction Phase
BSI Kitemark
BSI Kitemark™ for BIM Objects
EPD
Environmental Product Declaration EPD - Drylining
ISO 9001 Quality Management
ISO 9001:2015 Quality Management System
UK Conformity Assessed (UKCA)
UKCA Declarations of Performance - Drylining