Unleaded Everdry Stepped Cavity Trays for Blockwork
Verified by manufacturer 5 months ago
625 mm Intermediate Cavity Tray, Right Handed
625 mm Intermediate Cavity Tray, Right Handed
BBA Agrément Certificate
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
Stepped cavity tray system for blockwork/ stonework construction of 225 mm course heights.
Application
- At the abutment of a pitched roof with a cavity wall.
- On external walls (not exceeding 150 mm thickness) built from blockwork or stone with regular course heights, including mortar of approx. 225 mm.
- On roof pitches of 12.5° and above.
- Clear cavity widths of 50–125 mm.
Description
Stepped cavity tray system for blockwork/ stonework construction of 225 mm course heights.
Features and benefits:
- 150 mm high back upstand exceeds minimum requirements.
- Permanent stopend protects the perpendicular joint and cuts out water backtracking along the blockwork/ stonework.
- Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
- Choice of two lengths:
- 625 mm for roof pitches of 25° or above;
- 1250 mm for roof pitches of 12.5–22.5°.
- Can be specified separately with a pre-applied polystyrene strip mortar barrier.
- Leaded version also available, consult manufacturer for details.
Quality:
- BBA approved.
- Satisfies all NHBC requirements.
- Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
- Complies with all relevant Building Regulations.
- Meets all relevant British Standards.
General information
Color | Black |
Material | Polyethylene Guidance for specification option: 2.0 mm-thick, medium density, vacuum formed. |
Uniclass | |
CAWS | F30/56 Preformed cavity trays F30/370 Preformed cavity trays |
Specification data - Preformed cavity trays
Third party certification | BBA approved. |
Material | Polyethylene (PE), 2.0 mm-thick, medium density.Guidance for specification option: Vacuum formed. |
To fit cavity width | To suit clear cavity widths of 50–74 mm.To suit clear cavity widths of 75–99 mm.To suit clear cavity widths of 100–125 mm.Manufacturer guidanceProduct code will vary with external wall thickness specified. |
Height | 225 mm. |
Length (effective) | 625 mm.Guidance for specification option: Roof pitches of 17.5–22.5°. |
WallThickness | External wall thickness (bed) : 100 mm. External wall thickness (bed) : 125 mm. External wall thickness (bed) : 150 mm. |
Sustainability data
Third party certifications
Third party certifications
BBA Agrément Certificate
Timloc Building Products Adjustable Stepped Cavity Trays: BBA Agrement Certificate 93 2937, Product Sheet 2 Issue 4
ISO 14001 Environmental Management Systems
ISO 14001 Certificate
Literature
Timloc Building Products Everdry Adjustable Cavity Trays - Blockwork Datasheet
Similar products from Timloc Building Products
Lintel Stop End
Unleaded Everdry Stepped Cavity Trays for Brickwork
Unleaded Everdry Stepped Cavity Trays for Stonework
Unleaded Inter-loc Horizontal Cavity Trays
Unleaded System 2000 Horizontal Cavity Trays