Worktop Set, Flexi Electric, Ropox, 3 m

Guidance for specification option:

Bluetooth Adapter, Ropox.

The Ropox Connect App is an application which allows you to remotely control Ropox products:

• By connecting your iOS device to Bluetooth adapter inserted into a Ropox product, you gain the ability to adjust your product upwards or downwards
• After pairing the iOS device and the Ropox product has been completed, you’re able to remotely control the product from a great distance. In practice, this oftentimes is greater than 10 metres
• The application allows you to save height settings, to enable you to easily change between pre-set heights

Material: Plastic.

Installation: Screw fixing.

Guidance for specification option:

For electric adjustment of worktop system. For two motors.

Includes control switch and cables.

Guidance for specification option:

Suitable for single person use of the kitchen. Economical alternative to two separate Flexi frames. The hob, sink and preparation area can all be adjusted in one movement. Useful if space is limited by maximising the corner area. Not suitable for use with FlexiBasic.

• Maximum load of frame is 150 kg evenly distributed over the entire frame.
• For use with Flexi frames.
• Frame height adjustable from 650-950 mm.
• For 850-2450 mm frame width.
• Colour/finish: White.
• Material: Painted steel.

Supplied with: 

Internal corner joint and external corner joint for profiles and support arms and a corner transmission.

Order separately four legs 506.16.730 and required number of support arms 506.16.740.

For manual version order 1 x 506.16.950

For electric version order 1 x 2 motor control box 506.16.371, 2 x motors 506.16.360 and 1 x appropriate safety strip.

Guidance for specification option:

Fittings for Panel, Steel, Ropox. White painted.

For mounting pelmet to conceal wall mounted column.

Supplied with: 

• Four Adjustable ‘Z’ brackets, 103 x 77 x 137 mm.
• Two Top panel brackets, 240 x 50 x 32 mm.
• Eight Tapping Screws Ø4.2x10.
• Five Velcro tape strips.
• Bit T20 ¼”.
• Four screws.

Installation: If all installations and legs are to be hidden,

concealment panels may be mounted.

Guidance for specification option:

Safety strips ensure that worktops don’t just stop, but reverse their movement immediately when activated

• Allow sufficient for fascia front and returns in one piece.
• Safety strip length can be cut to exact size required. 1.6, 2.4, 3.2 and 4.2 m. Insert requirements.
• Strip length: 30 mm.
• Note: This safety strip must be used with all electric worktop systems.
• Colour: Black.

Guidance for specification option:

For electric adjustment of worktop system.

Cable length: 2 m.

Supplied with: Connecting cable

Guidance for specification option:

Smartbox is an intelligent system for avoid trapping.

Smartboxes can avoid the trapping risk between height adjustable worktops installed next to each other. It’s important that the side and front fascias have no worktop overhang

• One Smartbox is needed per frame for two or more adjacent FlexiElectric worktop frames and a VertiElectric or diagonal wall unit frame above a FlexiElectric frame.
• Movement up or down is stopped on every frame when any safety stop is activated.
• Colour: Black.

Guidance for specification option:

• Supports worktop depth 600–620 mm.
• Colour/finish: White
• Width: 50.00 mm
• Height: 50.00 mm
• Length: 495.00 mm
• Material: Painted steel.

The safety strip must be used with all electric worktop systems.

Guidance for specification option:

Leg allows height adjustment from 650–950 mm. Supplied with wall spacers and section cover.

• Material: Painted steel.
• Colour/finish: White.
• Width: 50.00 mm.
• Depth: 70.00 mm.

The safety strip must be used with all electric worktop systems

Guidance for specification option:

Aluminum wall bar profile length 1950 mm/ spindle length 1850 mm.

Bar profile 50 x 50 mm, with 8 mm steel spindle.

Can be cut to size (profile by 50 mm less than worktop, spindle by 100 mm less than profile.

The safety strip must be used with all electric worktop systems.

Guidance for specification option:

For use with manual or electric Ropox FlexiElectronic worktop, White painted and supplied with fittings.

• Material: Steel.
• Installation: Projects Flexi legs 70 mm off the wall
• Installation note: For use when there is a need to move the frame out from the wall.