NBS Source
I'm a manufacturer
Compare variants

WX Air Source Heat Pump Water Heater

Verified by manufacturer 5 months ago

WX-1-EC

Powrmatic Ltd Variant:

Industrial and commercial low temperature hot water heating systems.

Jump to:
+44 (0)1460 53535 Website

Application

The WX heating unit is used for heating small, medium and large spaces including:

  • Warehouses.
  • Factories.
  • Horticultural and garden centres.
  • Garage workshops.
  • Distribution/ logistical centres.
  • Showrooms.
  • Retail shops.
  • Poultry houses.

Description

The WX water heater is a revolutionary hot water system that is designed to deliver exceptional performance while providing reliable and energy-efficient hot water to residential and commercial properties. All WX units are available with a three-speed energy-efficient EC motor which gives guaranteed performance efficiency and is specifically designed to be fully compatible with ASHP (Air Source Heat Pump) systems.


The WX heating unit is used for heating small, medium and large spaces. WX units are compact devices ready for commissioning and easy to assemble and use daily. Up to 8 units can be connected within each system with advanced calendar option control.


Features and benefits:

  • Energy efficient performance.
  • ASHP Compatability
  • Compact size.
  • Fast mounting.
  • Intuitive connections.
  • Easy start up.

General information

Color

Grey

White

Green

Material

Acrylonitrile butadiene styrene (ABS)

Shape

Square

Length

300 mm

350 mm

Width

530 mm

700 mm

Height

530 mm

700 mm

Warranty description

One year

Uniclass

Pr_70_60_36_93 Unit heatersPrimary

CAWS

T90/110 Heating system

Specification data - Unit heaters

Standard

To BS 6880.

Unit type

Hot water emitter.

Output

3-20 kW.

Mounting

Ceiling-mounted.

Wall-mounted.

Sound power level

27–50 DB(A).

Mounting height

2–5 mm (wall mounting); 3–8 mm (ceiling mounting).

Electrical supply

230 V, 1 ph, 50 Hz.

Arrangement

Horizontal discharge.

Vertical discharge, with motor and fan mounted below heating element.

Casing finish

Traffic white (Front); Platinum grey (Rear and console); Green (Fan).

Connections

Screwed.

Accessories

Not required.

Potentiometer with thermostat.

Guidance for specification option:

  • Motor support: EC.
  • Power supply voltage: -230 V, 1 ph, 50 Hz.
  • Settings range: 5.3°C.
  • Work mode: Manual.
  • Hourly-weekly calendar: No.
  • Clock: No.
  • Temperature measurement: Integrated in the device.
  • Connection of separate temperature sensor: 1 or 4 pcs.
  • Output signal: 0–10V d.c.
  • Protection rate: IP30.

HMI EC controller.

Guidance for specification option:

  • Motor support: EC.
  • Power supply voltage: -230 V, 1 ph, 50 Hz.
  • Permissible load current: 1 A for 230 V a.c. 0,o2 A for 0–10 V.
  • Settings range: 5.40°C.
  • Work mode: Manual or automatic.
  • Hourly-weekly calendar: Yes.
  • Clock: Yes.
  • Temperature measurement: Integrated in the device.
  • Connection of separate temperature sensor: 1 or 4 pcs.
  • Output signal: 0–10V d.c.
  • Protection rate: IP20.


Flex. connectiong hoses (set).

Guidance for specification option:

  • Set includes: Hose (2 pcs) and gasket (4 pcs).
  • Length: 0.6–0.9 m.
  • Connection type:
  • Max fluid pressure:
  • Minimum working temperature for water:
  • Minimum working temperature for glycol:
  • Minimum working temperature:

Ingress protection

IP54.

Power

95 W.

MaximumWorkingPressure

1.6 MPa.

Capacity

1.12 dm³.

Weight

14 kg (Without water).

Dimensions

530 x 530 x 300 mm.

Guidance for specification option:

H x W x L.

Pipe diameter

19.05 mm.

Guidance for specification option:

  • Max water flow: 0.9 m³/h (1 heater connected to main line).
  • Max water flow: 1.8 m³/h (2 heaters connected to main line).

25.4 mm.

Guidance for specification option:

  • Max water flow: 2.7 m³/h (3 heaters connected to main line).
  • Max water flow: 3.6 m³/h (4 heaters connected to main line).
  • Max water flow: 4.5 m³/h (5 heaters connected to main line).

31.75 mm.

Guidance for specification option:

  • Max water flow: 5.4 m³/h (6 heaters connected to main line).
  • Max water flow: 6.3 m³/h (7 heaters connected to main line).
  • Max water flow: 7.2 m³/h (8 heaters connected to main line).
  • Max water flow: 8.1 m³/h (9 heaters connected to main line).
  • Max water flow: 9 m³/h (10 heaters connected to main line).

Sustainability data

Contains Red List materials

No

Literature

Powrmatic WX ASHP Hot Water Heater

Powrmatic WX ASHP Hot Water Heater

Similar products from Powrmatic Ltd

EUX Electric Unit Heater

EUX Electric Unit Heater

© 2024 NBS Enterprises Ltd. All rights reserved.