XPERT 8 Base - Detector Base

All detectors in the Soteria®, Discovery® and XP95® range fit into the XPERT 8 Intelligent Mounting Base. The base has a wide interior diameter for ease of access to cables and terminals. The ‘E-Z Fit’ feature allows you to fit the base screws, place the XPERT 8 Intelligent Mounting Base over the screws, slide it into place and tighten the screws. The detector requires a clockwise rotation into the base for fitting. Additionally, the detector can be locked into the base for increased security by a grubscrew using a 1.5 mm hexagonal driver. The XPERT 8 card, Part Number 38532-064, supplied with the base, has prepunched pips to remove to set the address. Refer to the XPERT 8 Intelligent Mounting Base Installation Guide 39215-005 for details on how to set the address.

Features and benefits:

• Compatible with Soteria, Discovery and XP95 detectors.
• Isolated and non-isolated devices are supported.
• Isolated wiper - maintains loop connectivity during temporary removal of devices.
• Supplied with XPERT 8 Card for CoreProtocol® *.
• ‘E-Z Fit’ allows for simple mounting of the detector base after wiring.
• Base mark allows for LED detector alignment.

* Note: XPERT 8 card increases the address capacity to 254 when using Soteria detectors and CoreProtocol-enabled fire control panels.