The Spanwall FP30 folded plank system is a pressed-formed 3 mm aluminium interlocking panel which is 30 mm deep. Spanwall FP30 is secretly fixed onto a traditional aluminium Helping Hand system using countersunk A2 screws. FP30 can be installed horizontally, vertically or diagonally. Unlike Spanwall RF50-FR and SF40-FR ventilated systems.

FP30 is not ventilated at the longitudinal joint, ventilation should be provided at the base and top of the vertical wall. The interlocking horizontal joint can be supplied as a hairline or up to 30 mm. FP30 is offered in modules of 150 mm to 600 mm, custom options are available on request. FP30 is offered in lengths up to 4000 mm.

Spanwall offers a full range of products and solutions including secondary support system, flashings, custom fabrications, inhouse stud welding, routing, perforating and fixings/ screws.

Features and benefits:

CWCT tested and fire tested (BS 8414-2:2020 and EN 13501-1).
Durable, lightweight envelope solution.
Flat panel surface.
Custom pre-finished panel.
Wide choice of materials and finishes.
Low maintenance solution.
Can be recycled.
Product warranty up to 25 years.

FP30 CWCT Test Report