To Specify a full Intumescent Fire Protection Coating System C1-C4 (Primer + Intumescent + Topcoat) click on the link below and add to your Chorus Specification:

Intumescent Fire Protection Coating Systems (C1–C4) - C1–C4 Corrosivity & Fire Protection | Hempel A/S | NBS Source (thenbs.com)

To Specify a full Anti-Corrosion System C1-C5 (No Intumescent Fire Protection) (Primer + Topcoat) click on the link below and add to your Chorus Specification :

Anti-Corrosion Protective Coating System (C1–C5) - For Corrosive Environments | Hempel A/S | NBS Source (thenbs.com)

For further advice on Specifications please contact Ian Morton at iam@hempel.com

Hempafire Pro 400

A one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires.

Optimized for R90, R120 and for in-shop and on-site applications.

Features and benefits:

Very competitive loadings results in reduced paint consumption in PFP projects.
Faster drying times thanks to lower thicknesses to apply.
Very good aesthetic finish, easy to apply and suitable for in-shop and on-site.
Same product can be used for all type of steel sections (open, hollows, cellular beams).

Application method:

Airless spray.
Brush.

Drying time:

Determined for dry film thickness 800 micron (32 mils) at standard conditions. Indicative values at 20ºC; Surface dry: 15 minutes, Through-dry: 16 hours.