To Specify a full Intumescent Fire Protection Coating System C1-C4 (Primer + Intumescent + Topcoat) click on the link below and add to your Chorus Specification:

Intumescent Fire Protection Coating Systems (C1–C4) - C1–C4 Corrosivity & Fire Protection | Hempel A/S | NBS Source (thenbs.com)

To Specify a full Anti-Corrosion System C1-C5 (No Intumescent Fire Protection) (Primer + Topcoat) click on the link below and add to your Chorus Specification :

Anti-Corrosion Protective Coating System (C1–C5) - For Corrosive Environments | Hempel A/S | NBS Source (thenbs.com)

For further advice on Specifications please contact Ian Morton at iam@hempel.com

Hempaprime Multi 500

A two-component, fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments.

Features and benefits:

Can also be used as self-priming, surface tolerant coat and a finishing coat in heavy-duty coating systems.
Suited for application down to 10°C (50°F).
The product is available in several MIO shades such as 18021 and 18061 both with 80% MIO content (reduced volume solid content to 77%).
Fast over-coating.
Crack resistant in high DFTs.
Low VOC.
Ready to use - optimized application properties.
Surface tolerant product.

Service temperature:

Maximum, dry exposure only: 120°C (248°F).

Certificates / Approvals:

Meets requirements to ISO 12944 when used as part of a predefined paint system. Part 6, Im2; Part 9, CX.
Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition no. 6, System 1.

Product compatibility:

Previous coat: None or according to Hempel’s specification.
Subsequent coat: None or according to Hempel’s specification. Recommended products are: Hempadur, Hempaprime, Hempathane.

Application method:

Airless spray.
Brush / roller.

Drying time:

Determined for dry film thickness 150 micron (5.9 mils) at standard conditions. Indicative values at 20ºC; Touch dry: 1 hour, Surface dry: 2.5 hours, Hard dry: 3.5 hours.