Boulevard™ Non-Cyclonic (COLORBOND® Steel)
Verified by manufacturer over a year ago
COLORBOND® Steel
COLORBOND® Steel
Wall cladding system with a flat, recessed joint look.
Application
Suitable for wall cladding applications that require a flat, recessed look.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
Boulevard™ is a wall cladding system with a flat, recessed joint look. This is achieved through interlocking panels that are pierce-fixed and installed with a ventilated air space. Some features of this system include:
- Contemporary design.
- Can be laid horizontally or vertically.
- Available in a wide array of colours and finishes.
- Available in a range of sizes.
General information
Material | Steel. |
Shape | Rectangle |
Warranty description | Manufacturer guidanceCovered by BlueScope material warranties, subject to project assessment and terms and conditions. |
Uniclass | |
SpeedSpec | 07462 Cladding External Walls |
NATSPEC National Classification System | 0436 Cladding – Profiled and Seamed Sheet Metal |
SpecPack | 07600 Metal Roofing, Siding and Roof Plumbing |
Specification data - Carbon steel sheets
Standards | To AS 1397, AS/NZS 1365 and AS/NZS 2728.Guidance for specification option: Installation of the cladding should be in accordance with AS 1562.1 and HB 39. |
Structural grade | G300. |
Coating | |
Class | AM100. |
Size | |
Length | Manufacturer guidanceSheets are supplied custom cut to length to suit project requirements. Transportation limits apply. Panels come in lengths of 0.50 m to 8.0 m. Provide manufacturing tolerance of ±7 mm in length. |
Width | 285 mm.485 mm.Manufacturer guidanceComes with a side depth of 22 mm. Provide manufacturing tolerance of ±4 mm in cover width. Other widths are available, subject to minimum order quantity. Contact local manufacturer for details. |
Thickness | 0.55 mm.Guidance for specification option: Total Coated Thickness of 0.60 mm. 0.75 mm.Guidance for specification option: Total Coated Thickness of 0.80 mm. Subject to minimum order quantities. Manufacturer guidanceRefers to Base Metal Thickness or BMT. Indicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material. |
Finish | |
Applied | Painted. |
Colour | Basalt. Classic Cream. Cottage Green. Cove. Deep Ocean. |
Material | COLORBOND® steel. |
Thermal expansion | 2.9 mm average per 5.0 m. Manufacturer guidanceComputed at 50° C change. |
Frame or support | Plywood. Guidance for specification option: Affix with 10g-16 x 25 mm Wafer or low profile Hex Head Type 17 screw with a minimum class 3 coating. Steel Batten. Guidance for specification option: Steel battens should be 40 mm x 0.75 mm BMT G550, to be supported at 450 mm centres maximum. Affix with 10g-16 x 16 mm Wafer or low profile Hex Head Tek screw with a minimum class 3 coating. Manufacturer guidanceRefers to recommended substrate and fasteners if product is to be installed without insulation. |
Mass | 5.31 – 5.92 kg/m² (0.55 mm BMT). 6.71 – 7.47 kg/m² (0.75 mm BMT). |
Insulation | Manufacturer guidanceWhen insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density. When insulation is required, Fielders® recommends the use of a thermal spacer. |
Installation | Manufacturer guidanceBoulevard™ needs to be fitted on a water tight barrier, which may consist of a precast wall, steel sheeting backing (such as Panelform™) or another waterproof membrane. Fielders® recommends the use of Panelform™. |
Sustainability data
Country of material origin | Australia |
Country of product manufacture | Australia |
Recyclability | 100% Recyclable. |