Designed for use as cable management systems to work with the stair edging illuminated profiles, or to illuminate floors, walkways, aisles and exit/ entrance routes.

A comprehensive range of PVC-u aisle and floor trims.

- Continuous light effect:

The LED's are housed in a polycarbonate assembly unit (LEDASSY). It is an end-illuminated acrylic rod incorporating reflective material which projects the light forward. The power consumption is 0.3 watts per LED which have a lifetime of up to 100 000 hours.

• Supplied in 2 m lengths for cutting or finishing on site. For optimum performance the recommended maximum length is 1.5 m.
• Two LED assembly units (LEDASSY) required per rod.

- Interlok (pinpoint light effect):

Printed circuit board strips that easily connect together, even around corners by using flexible connectors The viewing angle of LED is 120°. Cutting strips to desired length does not diminish brightness in the remaining LED's which have a lifetime of up to 100 000 hours and are surface mounted onto strips - six per strip at 100 mm spacing. The power consumption is 0.3 watts per LED.

• IAV/600/6: LED strip supplied in 600 mm lengths.
• 24 V option: Available with 25 or 50 mm spacing.
• RW1 stopper: Available to finish off tube where no end cap is used.
• IAVC1: One connector lead per step required.