Bronze, Gold, Copper, Other

-

-

Galvanized, Textured, Anti-graffiti, Anodized, Coated, Copper, Embossed, Metallic, Gloss, Mill, Matt, PVdF, Painted, Powder-coated, Pre-weathered, Stainless steel

-

-

Aluminium, Copper, Stainless steel, Zinc, Steel, Rock mineral wool, Glass mineral wool, Metal

-

-

Other

-

-

Bespoke

-

-

Bespoke

-

-

Bespoke

-

-

Other, 15 year, 20 year, 25 year, 30 year, 35 year, 40 year, Ten year

-

-

-

-

-

Kalzip Trapezoidal liner sheet in galvanised steel to BS EN 10326. 0.7 mm (Nominal) with Enamel White coating., Kalzip Trapezoidal liner sheet in aluminium 0.9 mm Stucco Embossed.

-

-

5.5 mm diameter carbon steel self-drilling fasteners (SD-3-T15-5.5x25).

-

-

Side laps to be stitched at maximum 400 mm centres with 4.8 mm diameter carbon steel self-drilling stitching fasteners (SL2-T-4.8x20).

-

-

-

-

-

Kalzip VCL Clear - Reinforced virgin polyethylene with 530 MNs/g vapour resistivity.

-

-

Seal with one row of sealant tape, not less than 50 mm.

-

-

Support clips, steel reinforced polyamide Kalzip E-clips type E160 fixed to 30 mm deep steel tophats channels.

-

-

Kalzip Plus40 Insulation, 205 mm.

-

-

To accurately match sheet profile. Adhesive recommended by profile filler manufacturer.

-

-

-

-

-

Kalzip Standing Seam 50/333., Kalzip Standing Seam 50/429., Kalzip Standing Seam 50/444.

-

-

6 mm diameter stainless steel torque controlled fasteners (SDK3-S-377-6.0x45). Position and frequency to be determined by calculation by Kalzip Technical.

-

-

Steel tophats to be secured to steel saddles at purlin positions. Position and frequency to be determined by calculation by Kalzip Technical.

-

-

Sheets to be supplied in continuous lengths and mechanically seamed to support clips with Kalzip zipping machine.

-

-

Extruded aluminium alloy (EN AW-6061) gable end hooks. Extruded aluminium alloy (EN AW-6063) drip angle 40 x 20 mm. Extruded aluminium alloy (EN AW-6063) flat bar 22 x 6 mm. Extruded aluminium alloy (EN AW-6063) gable end channel. Extruded aluminium alloy (EN AW-6063) tolerance gable clip extrusion. Fabricated aluminium alloy (EN AW-3004) flashings. Fabricated aluminium alloy (EN AW-3004) ridge closures (KZ 65/400). Fabricated welded soaker units. Kalzip profile eaves fillers. Kalzip profile ridge fillers.

-

-

0.20 W/m²K.

-

-

58 mm (minimum).

-

-

Kalzip profiled fillers - Closed cell cross-linked polyethylene with a minimum density of 30 kg/m³.

-

-

-

-

-

Aluminium, AluPlusPatina., Aluminium, natural stucco embossed., Aluminium, with a PVDF paint coating., Aluminium, with an HPC paint coating., AluPlusZinc., Copper., Stainless steel.

-

-

-

-

-

-

-

-

Institute fur Bautechnic Zulassungbescheid N R 14.1-181.

-

-

Leave space between sheets to coincide with structural movement joints. Fix weathertight movement joint cover to sheets on one side only. Movement joint cover detail to be as per Kalzip Ltd recommended detail KZ-0-MISC-K-8-006.

-

-

Fixing sheets generally:
Remove all drilling swarf, dust, debris and any other foreign matter before finally fixing sheets into position. Protect sheets adequately during fixing and up to practical completion against mechanical damage, corrosion and disfigurement. Rectify any defects as quickly as practicable to minimise damage and nuisance. Install fasteners to correct tightness using any special tools recommended by the manufacturer.

-

-

Kalzip sheets to be installed by mechanically seaming sheets to support clips with Kalzip zipping machine.
Kalzip sheets to be installed as per cladding manufacturer's instructions, British Board of Agrément Certification No. 98/3481 and Institute fur Bautechnic Zulassungbescheid N R 14.1-181.

-

-

Cappings, closure pieces, flashings, trims, fillers, spacers, tapes, sealants, fixings, etc, where not specified, to be types recommended by the cladding manufacturer.

-

-

Type(s), size(s), material(s) and finish(es) as specified, or in the absence of such specification, as recommended for the purpose by the cladding manufacturer.

-

-

Soffits, where not specified, to be recommended by the cladding manufacturer.

-

-

Frequency of soffit supports determined by project engineer.

-

-

No

-

-

Germany

-

-

United Kingdom

-

-

Aluminium, Copper, Stainless steel, Zinc, Steel, Rock mineral wool, Glass mineral wool, Metal

-

-

110 Hall Wood Ave, Saint Helens WA11 9WB, UK

-

-

9.61 kg CO₂ eq/kg

-

-

Excellent

-

-

100 %

-

-

40 year

-

-