Summary
A sealing and bonding tape which has a high strength acrylic dispersion adhesive, and has an elastic LDPE-film carrier and is reinforced with scrim.
A sealing and bonding tape which has a high strength acrylic dispersion adhesive, and has an elastic LDPE-film carrier and is reinforced with scrim.
Application
Novia UVLT can be used with Novia Breather Membranes such as Novia UV Facade FR, as an edge and lap sealing tape. To fully complete a breather membrane seal and further reduce the air-leakage of the construction, this tape should be used with DSLT.
Novia UVLT is required for use with some breather membranes in accordance with BS 5534 wind uplift requirements. The installation of a two-tape system using both UVLT and DSLT will provide a high specification finish.
Novia UVLT can be used with Novia Breather Membranes such as Novia UV Facade FR, as an edge and lap sealing tape. To fully complete a breather membrane seal and further reduce the air-leakage of the construction, this tape should be used with DSLT.
Novia UVLT is required for use with some breather membranes in accordance with BS 5534 wind uplift requirements. The installation of a two-tape system using both UVLT and DSLT will provide a high specification finish.
Description
Is a sealing and bonding tape which has a high strength acrylic dispersion adhesive.
Features and benefits:
- Particularly suited for use in open facade UV breather membrane applications in walls as it has a high UV resistance.
- UVLT has 24 months UV stability in open rainscreen applications with maximum joint widths up to 30 mm, where <40% of the total area of the membrane is exposed.
- It is suitable for overlaps and joints, on breather membranes within standard roof applications, where additional protective UV resistance is desired.
- UVLT is used to seal membrane overlaps which will protect against external environmental conditions and improve airtightness.
Is a sealing and bonding tape which has a high strength acrylic dispersion adhesive.
Features and benefits:
- Particularly suited for use in open facade UV breather membrane applications in walls as it has a high UV resistance.
- UVLT has 24 months UV stability in open rainscreen applications with maximum joint widths up to 30 mm, where <40% of the total area of the membrane is exposed.
- It is suitable for overlaps and joints, on breather membranes within standard roof applications, where additional protective UV resistance is desired.
- UVLT is used to seal membrane overlaps which will protect against external environmental conditions and improve airtightness.
Color
Black
Black
Finish
Other
Other
Material
Low density polyethylene (LDPE), Acrylic
Low density polyethylene (LDPE), Acrylic
Shape
Rectangle
Rectangle
Length
25000 mm
25000 mm
Width
75 mm, Bespoke
75 mm, Bespoke
Height
0.31 mm
0.31 mm
Warranty description
Lifetime
Lifetime
Specification
Classification data
Material
Non-woven polypropylene.
Non-woven polypropylene.
Bond
Single-sided acrylic adhesive.
Single-sided acrylic adhesive.
Air permeability
Air and water vapour tight.
Air and water vapour tight.
Size
50 mm wide.
75 mm wide.
Colour
Grey.
Grey.
Additional properties
Length
25000 mm.
25000 mm.
Thickness
0.57–0.59 mm.
0.57–0.59 mm.
Roll weight
0.55 kg.
0.8 kg.
Service temperature range
-30°C to +100°C.
-30°C to +100°C.
Application temperature
+5°C.
+5°C.
Moisture vapour resistance
High.
High.
Elongation
≥50 N/25mm.
≥50 N/25mm.
Peel resistance
≥25 N/25mm.
≥25 N/25mm.
Sustainability data
Contains Red List materials
No
No
Country of material origin
United Kingdom
United Kingdom
Country of product manufacture
United Kingdom
United Kingdom
Material
Low density polyethylene (LDPE), Acrylic
Low density polyethylene (LDPE), Acrylic
Recyclability
Non-recyclable.
Non-recyclable.
Recycled content
0 %
0 %
Expected Life
Lifetime
Lifetime