Pendock

Brushed stainless steel column casings from the Pendock Radius range are being used to conceal structural steelwork at University College London’s East Campus at Pool Street on the Queen Elizabeth Olympic Park, Stratford.Each of the 12 column casings, which are 775mm in diameter and range in height from 3215 to 3370mm, are installed in four external locations on the third level of the university building’s two towers, which function as student relaxation areas.As the column casings are exposed to the elements, their stainless steel construction is an ideal solution as they’re weather resistant, virtually maintenance free and highly durable.

A series of metal column casings with a bright red PPC finish are being used to conceal structural steelwork around the perimeter of Stevenage railway station’s recently opened multi-storey car park in Lytton Way.Bespoke manufactured from aluminium, the 400mm diameter column casings range between 2.7m and 3.0m in height and incorporate apertures to accommodate the galvanised steel ‘crash barriers’ which either pass through the casings or are joined inside.The red finish not only add a splash of colour to the car park’s design, but also provides clear high contrast signalling of its entrance and exit points.

Metal pipe boxing from the Pendock Profiles range is concealing heating pipework, electrical cabling and ventilation ducting at Phoenix Point in Thamesmead as part of a refurbishment and upgrade programme of homes at the striking, cylindrical high rise building.Originally built in 2008 on the site of a boiler house used for a community heating scheme, the 8 storey, circular building provides a mix of one and 2 bedroom flats. The Pendock aluminium boxing is used extensively in the refurbishment and is located below the walkway on each tier, following the form of the structure to conceal building services, as well as acting as a mounting point for lighting.

A series of column casings from the Pendock Radius range, three of which reach more than 11 metres high, have been installed at the new Extreme Photonic Application Centre (EPAC) building at the Harwell Campus in Didcot, Oxfordshire.Each of the 350mm diameter column casings are manufactured from pre-formed ply/MDF with a durable high pressure laminate finish, which resists scuffing and damage. The casings are stacked to reach the extended heights required to conceal interior structural supports behind the building’s glazed facade.In addition to the three 11 metre high casings, which form part of the main entrance and reception area, the other Pendock Radius casings are located in an adjacent area, which provides access to laboratories and offices.

The latest sustainable materials to be added to our range are BioCarbon® zero carbon laminates. These are the first carbon neutral materials of this type to be available in the UK.In addition to having all the durability and decorative characteristics of standard HPL materials, BioCarbon also provides both anti-bacterial and anti-microbial protection, as well as being zero carbon.This combination of features makes it ideal for our Pendock Washroom range of cubicles and is also used within our Pendock Linea building linings products as a durable finishing solution.BioCarbon is manufactured using renewable and sustainable energy sources together with a range of initiatives to offset production processes making it carbon neutral. Manufactured in Colombia, where almost 70% of all energy generated is from hydro-electric, this is what powers, the manufacturing plant.Beyond this, the material used to create the HPL and CL laminates, which is primarily paper, is harvested from sustainable sources and is offset by BioCarbon with its own 200 hectare re-forestation programme that helps absorb 400 tonnes of carbon dioxide, annually. The programme is monitored and audited by PwC.Storage, handling and distribution impacts are also factored into the calculations, which results in a range of products, where the entire process from manufacturing to fabricator is carbon neutral.

Decorative wall linings from the Pendock Linea building linings range are being used at 2 Ruskin Square in Croydon, to conceal mechanical details surrounding a ground floor feature wall & fire curtain, while also providing a consistent finish to lift lobbies on each level of the 10 storey building.Designed by architects, Allford Hall Monaghan Morris, the building provides 340,000 square feet of office space and incorporates retail units at ground level. The bespoke wall linings are manufactured from 3mm thick aluminium with a RAL 8022 finish and were also installed by Pendock using a concealed panel hanging system.

A recently completed 90,000 sq.ft office building at Prospero Ansty Park in Coventry is using bespoke designed and manufactured beam casings from the Pendock Linea building linings range, as part of the new structure’s full length glazed atrium.Manufactured from aluminium with a white PPC finish, the casings have a parabolic form and are used to conceal the atrium’s lateral structural supports to provide an aesthetic finish, which is in keeping with the building’s contemporary interior design. Pendock also installed the casings to ensure the final fit & finish met the high standards required.

The transformation and repurposing of an existing building into new serviced offices in Shropshire is using bespoke manufactured aluminium parapet capping from the Pendock Linea range to provide high-quality finish.Incorporating a slate grey PPC finish, to blend in with the existing column casings that support the canopy, the PC-F style flat parapet capping's are manufactured from 2mm thick aluminium, which resists weatheringPendock carried out all the site surveys, manufacturing and the final installation of the parapet capping's on this project, which involved the removal and re-fitting of the column casings to provide a water-resistant barrier for the brickwork.

Avanti Fields School in Leicester is using bespoke manufactured external wall linings from the Pendock Linea range to add colour and style to the main entrance of the new build school, which was completed in 2021 by BAM Construction.Each of the 10 wall linings incorporates a unique design, which is applied using digital printing onto highly durable compact laminate panels, which were installed to the architect’s specification by Pendock’s specialist installation team.

The London borough of Camden’s extensive heating system renewal and refurbishment programme at the St Silas Estate is using bespoke manufactured metal pipe boxing boxing from Pendock to conceal external pipework on several high rise blocks where the community heating system is being upgraded.The metal boxing from the Pendock Profiles range is bespoke manufactured from 2mm thick aluminium to ensure it fully conceals the vertical and horizontal pipework used on the new heating system. Incorporating two PPC finishes in brown and dark yellow to integrate with the brickwork, the boxing not only conceals the pipework, but also protects it from damage.

Durable and decorative lift reveals, manufactured from stainless steel, aluminium and laminated plywood, provide a practical and aesthetic enhancement to lift installation and refurbishment projects, as well as lift lobby upgrades.Every lift reveal is designed and manufactured by us to meet the exact specifications of each individual project with great attention to the detail, fit and finish of every component.All linings are manufactured to comply with the relevant safety legislation, incorporating safe edges and corner radius detail.

Metal column casings standing almost 6 metres high are being used at the Porsche Centre in Preston, Lancashire, to conceal interior structural steelwork and utilities within the two-storey main showroom and office area.Manufactured from 3mm thick aluminium with a grey RAL 9007 PPC finish, the twelve 375mm diameter metal column casings, from the Pendock MET-CL range, incorporate colour matched joint covers, header and skirting collars infills, to integrate with Porsche’s corporate colour scheme.

A combination of bespoke and standard column casings from the Pendock Radius range are being used to conceal structural supports at two John Lewis stores in Liverpool and Manchester’s Trafford Centre.At its Manchester store, a series of square pre-formed plywood column casings finished in durable white laminate, are located throughout each floor with many of the casings in the clothing retail areas are bespoke manufactured and incorporate full height mirrors, which are mounted to the flat surface.Square column casings also feature in the multi-storey Liverpool shop and are also manufactured from pre-formed plywood with a white laminate and aluminium feature joints. In addition, circular column casings, manufactured from laminated preformed plywood, are installed in product display areas, such as menswear.

A project to install a communal heating system at low rise flats and maisonettes at Bretton House and Sanders Way, in the London Borough of Islington, is using bespoke metal pipe boxings to conceal external pipework.The more efficient heating system was installed as part of Islington Council’s ongoing cyclical repair programme, which assesses all properties on a 7 to 10 year cycle to establish where improvements need to be planned & implemented.The Pendock casings are manufactured from 2mm thick corrosion resistant aluminium and incorporate a brown PPC finish to integrate with the brickwork and provide a consistent finish to the project. The use of aluminium not only improves weather resistance, but also adds tough protection to the external pipework.

St. Bartholomew’s Hospital was originally founded in 1123 and the latest design was handled by architects HOK International Ltd, as part of a major redevelopment, which involved the hospital staying open during construction.Key features of the design are four Pendock Radius column casings that span the floor to ceiling height of almost 18 metres, which are located on one side of the main atrium. In addition, a further 65 casings of between 2.7 and 4.1 metres in height were installed on different floors within corridors, waiting rooms and admin areas. All casings were bespoke manufactured.

Extensive upgrades to the distributed heating system at two low-rise housing blocks by Camden London Borough Council, have chosen Pendock bespoke metal pipe boxing to conceal and protect exterior pipework.The 3 storey Ludham block and 6 storey Waxham building provide more than 200 dwellings, which are occupied by both tenants and leaseholders. Following the installation of the heating system pipework to the exterior of the buildings, the Pendock aluminium and PPC coated boxing was installed to provide a uniform and more aesthetic finish to the project while also providing weather protection.

Metal pipe boxing from the Pendock Profiles range is being used at a London tower block to conceal and protect fire sprinkler pipework, cabling and other services as part of a fire safety upgrade and refurbishment programme.Bespoke manufactured to the exact dimensions and project requirements, the metal boxing is non-combustible, which makes it suitable for use in public areas, such as lift lobbies, landings and corridors, where no sprinkler heads are present.Finished in white PPC, the metal pipe boxing not only improves the overall aesthetics, but also provides durable protection for pipework and services, while the integrated hinged inspection panels allow easy access for routine checks and maintenance.

A former HMRC building has been transformed, inside and out, to create Telford’s largest serviced office accommodation with over 52,000 sq.ft of space for 50 offices.As part of the extensive refurbishment programme, the building’s main entrance has also been given a facelift with a new canopy incorporating Radius metal column casings, with a bespoke stepped collar design, as well as bespoke metal bulkheads and fascia's from the Pendock Linea building linings range.

Extensive use of parapet capping from the Pendock Linea building linings range has helped improve weather resistance and aesthetics at a modern student accommodation building in Kingston-upon-Thames.Bespoke manufactured from high quality aluminium with a grey PPC finish, the flat PC-F style parapet capping's are fitted to the entire building to improve the integrity of the flat roof and stop the ingress of water.

Telford’s Leegomerry Community Centre provides a range of services to the local community and surrounding areas including educational courses, assistance for job seekers and other social activities, as well as providing care and education for children from 2 to 5 years.To help provide children with washroom facilities tailored to their specific needs, cubicles and vanity units from the Pendock Education range have been installed, which include durable high-pressure laminate doors and panels finished in bright primary colours

Hull’s St. Stephens Shopping Centre hosts around 10 million shoppers every year, so when it came to refurbishing and upgrading its washroom facilities, it was vital that they were not only durable but also stylish and high quality. All of these were key reasons why Pendock Classic Plus cubicles, vanity units and duct panels were chosen for the project.Manufactured from 20mm thick moisture-resistant, high-density chipboard with a durable high-pressure laminate (HPL) woodgrain finish, the quality of the new facilities has already prompted the Hull Daily Mail to say: “They may well be the nicest public toilets in Hull.”

Cubicle and washroom systems from Telford based casing and enclosure specialist, Pendock, provide a comprehensive range of solutions to meet most specifications and requirements for single or multi-cubicle installations, as well as IP panels systems.Originally launched in 2005, the range was later extended with the addition of lockers and changing room products, which together with regular colour and finishes updates, has led to their use in a range of sectors, including education, retail, health, leisure and public buildings.Five systems are available under the Pendock Washroom brand, which include the Classic; Classic Plus; Robust; Ultimate and Education – as well as modular IPS panels and bespoke solutions.The Classic range is manufactured from 18mm thick MFC (melamine faced chipboard) and is designed for use where economy and simplicity are key factors, while the Classic Plus uses the same core, but is faced with high pressure laminate. Both models are edged with 2mm PVC.Designed for high traffic and wet areas, including high humidity zones, Robust cubicles are produced from 12mm compact laminate (CL), which provides high durability, excellent value and design flexibility to meet the demands of most washroom projects.Pendock’s Ultimate cubicles are also manufactured from 12mm CL with a radiused edge. The range provides an exceptionally wide choice of options and can be specified with any finish or colour combination to meet exact interior design or project requirements.The dedicated Education range covers washrooms from nursery through to further education and are available in 18mm MFC or HPL, as well as 12mm CL in a range of colours and finishes including special options for early years and schools through all key stages.For complete design versatility, every aspect the IP panel system and bespoke washroom range can be specified, including the core material, finish colours, graphics, panels and door sizes, as well as pilasters and ironmongery.Vanity units, back panels and accessories are also available across the range, alongside DDA and Approved Document M compliant options, allowing specifiers to maintain design consistency and integrity, whilst providing high levels of versatility and cost-effectiveness.

More than 40 bespoke column casings from Pendock were installed as part of a £10.5 million refurbishment programme at Birmingham’s National Exhibition Centre (NEC) to improve the main piazza and facilities.Three different styles of casings were used on the project, the building’s square section structural columns concealed with either circular or extended circular pre-formed ply/MDF casings, finished durable high-pressure laminate (HPL), spanning the floor to ceiling height of around 4 metres.In addition, a series of narrow elliptical casings, finished in red HPL, were manufactured to provide visible signalling of each hall’s entrances. The entrance ‘fins’ also incorporate chrome numbers to identify individual halls.

Laminated column casings from the Pendock Radius range are providing a splash of colour, while also concealing structural steelwork at the Virgin Active gym in Islington, London.The 450mm diameter column casings are manufactured from ply/MDF and are each finished with a highly durable high-pressure laminate (HPL) in bright yellow and scarlet to provide an eye-catching solution that integrates with the gym’s contemporary design.Manufactured in ‘quadrants’, each column casing section incorporates a contrasting black shadow gap feature joint, as well as black header and skirting collars. The casings are also used to surface mount large mirrors, while the HPL finish is resistant to scuffs and damage, making it ideal for high-traffic environments

A heating system upgrade programme at an age exclusive housing development at Rectory Close in Grantham, Lincs, is using aluminium boxing from the Pendock Profiles range to conceal pipework runs that feed into each flat. Originally built in 1968, Rectory Close provides 16, one-bedroom flats, operated by social landlords South Kesteven District Council.The Pendock metal pipe boxing is bespoke manufactured from 2mm thick aluminium to ensure it fully conceals the vertical and horizontal pipework used as part of the heating upgrade. Incorporating a PPC RAL 9005 black finish, the boxing not only conceals the pipework, but also protects it from damage.

As part of a three-year programme by Birmingham City Council to install fire sprinklers in 10,000 flats across 213 tower blocks, Pendock MXF sprinkler boxing is being used to conceal surface mounted pipework.Manufactured from pre-formed plywood and incorporating a white finish, MXF fire sprinkler boxing was specified, rather than on-site fabrication to provide a consistent and uniform finish while minimising the visual impact of the new fire safety measures in each tenant’s home.Also, it doesn’t require painting and typically takes less time to fit than site made alternatives, which helps reduce labour costs and minimises tenant disruption.

A combination of Pendock Radius column casings and Pendock Linea pilaster linings are installed at Sheffield’s Royal Hallamshire Hospital to conceal structural supports, hospital services and waste pipework.Manufactured from pre-formed ply/MDF, every bespoke casing is finished in durable and easy-to-clean high-pressure laminate (HPL), which not only resists damage but also supports hygiene regimes.In addition to concealing electrical cabling and pipework for hand washing, the casings also incorporate a range of facilities, such as wash basins, electrical power outlets, light switches and nurse call buttons, which are all mounted to the surface.

The award-winning Skelton Lakes motorway services near Leeds is using bespoke manufactured architectural linings from the Pendock Linea range. GRG pilasters were specified to provide a consistent finish between shop fronts, whilst integrating with the dry lined walls above. They also include a 30mm radius on each corner to ensure there are no sharp edges and a stainless-steel kick plate at the base.GRP bulkheads are used to conceal the steel floor beams at first-floor level, which were manufactured to follow the gentle curve incorporated in the design of the shop fronts. By using GRP it allows a small amount of flex to ease installation and ensures the minimum additional mass is added to the structure.

Riverside age exclusive housing in Grantham is using aluminium boxing from the Pendock Profiles range to conceal pipework installed as part of South Kesteven District Council’s programme of heating system upgrades.Originally built in 1980, Riverside provides 50 one & two bedroomed flats, and the metal boxing covers both horizontal and vertical pipe runs across the front and sides of the buildings as well as the point where they enter each flat. The Pendock metal pipe boxing is bespoke manufactured from 2mm thick aluminium and incorporates Incorporating a PPC RAL 9005 black finish.

The refurbishment of washrooms across six floors at a local authority office building in Telford used our Robust cubicles from the Pendock Washroom range finished with complimentary green and Zebrano laminates for the panels and doors.Both male and female washrooms were upgraded as part of the programme with standard and disabled access cubicles incorporated within the design with outward opening doors.

The striking five-storey building at the Ellesmere Port Campus of West Cheshire College is constructed on a circular plan, which creates a large open space and atrium.From the ground floor to the uppermost level, a series of Pendock Radius metal column casings conceal the structural supports, which provide clean lines that integrate with the interior.

When concealing external pipework, building services and utilities associated with low carbon district heating schemes or air-source and ground-source heat pumps, Pendock metal pipe boxing range provides effective protection against accidental damage while helping improve project aesthetics.Bespoke manufactured to the individual project specifications from 2mm aluminium, as standard, metal boxing is available in two styles. CHM is a three-sided channel profile, for securing to a single flat surface, while the MXM is a two-sided 90-degree design for fixing to adjacent surfaces, such as walls and ceilings.Both profiles are available with two fixing options for increased versatility – EFF profiles have an integrated external flange on each edge, enabling them to be readily secured with suitable fasteners, while IFA profiles are designed to be installed using separate, concealed fixing angles and fasteners.CHM and MXM profiles are also used to conceal fire sprinkler supply pipework mounted in open balconies, or externally to flats, to provide added security and weather resistance. In addition, as metal boxing is non-combustible, it is used in high rise residential blocks to conceal interior sprinkler pipework where no sprinkler heads are present, such as communal areas.Usually supplied with a PPC finish, which can be selected from any RAL colour to blend in or contrast with the surroundings, Pendock’s metal boxing profiles are available in lengths of up to 4.0 metres, as standard. Other lengths and material thicknesses are available on request, as well as options to include perforations and hinged access hatches.A range of dedicated accessories is included within the CHM and MXM metal boxing range, which includes internal and external corners, stop ends and joint covers, as well as fixing angles, access panels and TEK fixings, which can be colour coded if required.Pendock metal boxing is part the extensive Profiles range of pipe boxing and casings, which includes pre-formed plywood pipe and fire sprinkler boxing, as well as boiler pipe casings. A range of technical information is available online including PDF and DWG drawings as well as NBS specification clauses.

The Spires Health Centre in Wednesbury, West Midlands, is using two bespoke metal column casings from the Pendock Radius range to conceal structural steelwork used to support the building’s delta shaped main entrance canopy.Manufactured by Pendock from 2mm thick aluminium, the elliptical casings measure 560mm by 380mm, to enclose the health centre’s two ‘I’ section steel canopy supports, which helps minimise the column casing footprint and reduce their overall size.They also incorporate a matt PPC finish, in RAL 7005, Mouse Grey, each metal column casing uses a two-piece stacked construction, enabling them to reach their respective heights of 6.8 metres and 5.9 metres.

Metal pipe boxing from the Pendock Profiles range has been installed in the communal areas of a seven storey tower block in Walsall to not only conceal electrical services and conduits, but also protect the existing distributed heating system pipework in the building’s lift lobbies and stairwells.The 2mm thick aluminium pipe boxing has a white PPC finish and was bespoke manufactured by Pendock to the precise dimensions required for the project, as it needed to follow the different electrical and heating system paths on each level, which varied depending on the position of the flats, stairwell orientation and riser locations.